产品分类

优质供应商更多>>

联系我们更多>>

联系人:赵礼春  先生 (商务部  经理)
手 机:18951262418
电 话:86-0517-86844418
传 真:86--
地 址:中国-江苏-淮安-江苏省金湖县金南幸福路
邮 编:211611
网 址:http://ccdlyxgs.machine365.com/General/
搜索:

产品详情

JFEYH高压电机引接线

  • 当 前 价:10.00元/米
  • 最小起订:100米
  • 供货总量:10000米
  • 发 货 期:10天内发货
  • 有效期至:2021年1月1日
  • 所 在 地: 江苏 淮安
  • 843499471

  • 收藏此信息 推荐给朋友

联系我们

联系人:赵礼春  先生 (商务部  经理)
电 话:86-0517-86844418
手 机:18951262418
传 真:86--
地 址:中国-江苏-淮安-江苏省金湖县金南幸福路
邮 编:211611
网 址: http://ccdlyxgs.machine365.com/General/

江苏春晨电缆有限公司生产JFEYH高压电机引接线、内半导体屏蔽处理
Internal semiconductor shielding treatment
凡电缆本体具有内屏蔽层的,在制作接头时必须恢复压接管导体部分的接头内屏蔽层,电缆的内半导体屏蔽均要留出一部分,以便使连接管上的连接头内屏蔽能够相互连通,确保内半导体的连续性,从而使接头接管处的场强均匀分布。
When the cable body has the inner shielding layer, the inner shield of the joint must be restored when the joint is made, and the inner semiconductor shielding of the cable must be left out so that the shielding in the connection head on the connecting pipe can be connected to each other to ensure the continuity of the inner semiconductor and the field strength of the joint nozzle. It is evenly distributed.
3、外半导体屏蔽的处理,JFEYH高压电机引接线
3, the treatment of the shielding of the outer semiconductor
外半导体屏蔽是电缆和接头绝缘外部起均匀电场作用的半导电材料,同内半导体屏蔽一样,在电缆及接头中起到了十分重要的作用。外半导体端口必须整齐均匀还要求与绝缘平滑过渡,并在接头增绕半导体带与电缆本体外半导体屏蔽搭接连通。
The shielding of the external semiconductor is a semi conductive material which acts as a uniform electric field outside the insulated cable and joint. It plays a very important role in the cable and the joint, like the internal semiconductor shielding. The external semiconductor port must be neat and uniform, and it requires smooth transition with insulation, and it will be connected to the semiconductor semiconductor shield in the junction.
4、电缆反应力锥的处理
4. Treatment of cable reacting force cone
施工时形状、尽寸准确无误的反应力锥,在整个锥面上电位分布是相等的,在制作交联电缆反应锥时,一般采用专用切削工具,也可以用微火稍许加热,用快刀进行切削,基本成型后,再用2mm厚玻璃修刮,最后用砂纸由粗至细进行打磨,直至光滑为至。
During the construction of the whole cone, the potential distribution is equal in the shape of the construction and the accurate and unmistakable reactivity cone on the whole cone. In the production of the crosslinking cable reaction cone, the special cutting tool is usually used. It can also be heated a little by the micro fire and the cutting with a quick knife. After the basic molding, the 2mm thick glass is used to make the scraping. Finally, the sand paper is made from coarse to fine. Make grinding until smooth.
5、金属屏蔽及接地处理
5, metal shielding and grounding treatment
金属屏蔽在电缆及接头中的作用主要是用来传导电缆故障短路电流,以及屏蔽电磁场对临近通讯设备的电磁干扰,运行状态下金属屏蔽在良好的接地状态下处于零电位,当电缆发生故障之后,它具有在极短的时间内传导短路电流的能力。接地线应可靠焊接,两端盒电缆本体上的金属屏蔽及铠装带牢固焊接,终端头的接地应可靠。
The function of metal shielding in the cable and the joint is mainly to conduct the fault short-circuit current of the cable and the electromagnetic interference of the shielding electromagnetic field to the adjacent communication equipment. The metal shield is at zero potential under good grounding state under the running state. When the cable fails, it can transmit short circuit in a very short time. The ability to flow. The grounding wire shall be solidly welded, metal shields and armored belts on both ends of the cable body are solidly welded, and the grounding of the terminal head shall be reliable.

  • 品牌
    春晨
  • 型号
    JFEYH
  • 规格
    1*120
  • 材质
    紫铜
  • 适用范围
    电机引接线